PACSystems RX3i CPUs, IC695CPE310 (GFK-2713) ka3QA0000001MbBYAU | Emerson Customer Center

PACSystems RX3i CPUs, IC695CPE310 (GFK-2713)


  • Id:
  • 000052489
  • Legacy Id:
  • DO2348
  • Average User Rating:
  • Your Rating:
  • Last Updated: Tue Nov 14 19:26:38 GMT 2023
  • Date Created: Thu Sep 29 10:43:34 GMT 2011
  • Products: PACSystems RX3i
  • Categories: Data Sheets/IPIs

Product information and release history for IC695CPE310

ATTENTION: Applications using CPE3xx Version 10.05 (or later) with a PNC001-Bxxx must also upgrade the PNC to Version 3.16 (or later) for compatibility with the controller. This is applicable only if you are using a CPE3xx (CPE302/305/310/330). The PNC001 (Bxxx or later) needs to be upgraded as well for compatibility with CPE3xx controllers running firmware 10.05 or later.   

Go here to download version 3.16 PNC firmware kit, IC695PNC001 - PACSystems RX3i PROFINET Controller

  • Attached Files

  • GFK-2713AM_IC695CPE310_IPI.pdf

    Posted: 11/14/2023

    Adds support for Run Mode Store (RMS) to User Flash, SVC_REQ 63 Logic Driven Data Write to Non-Volatile Storage, and three diagnostic %S bits. This release also resolves the issues found in the Problems Resolved in this Release section.

  • GFK-2713AL_IC695CPE310_IPI.pdf

    Posted: 5/24/2023

    GFK-2713AL: Adds support for IC695CHS007/CHS012/CHS016-JC or later 7/12/16slot backplanes.

  • GFK-2713AK_IC695CPE310_IPI.pdf

    Posted: 10/13/2022

    Adds support for OPC UA 2D Array Access and addresses issues in the "Problems Resolved in this Release" section.