PACSystems RX3i and RSTi-EP CPU Reference Manual, GFK-2222 ka36N000000k9v3QAA | Emerson Customer Center

PACSystems RX3i and RSTi-EP CPU Reference Manual, GFK-2222

This manual describes installation, configuration and operation of PACSystems RX3i and RSTi-EP PLC CPUs.

  • Attached Files

  • GFK-2222AX - PACSystems CPU Ref Man.pdf

    Posted: 5/25/2023

    GFK-2222AW: Updated Section 3.2.1 and 4.5.4 to include CPE400/CPL410 for RMS to User Flash. Added mentions of CPE400/CPL410 to Section 4.8 with SVC_REQ 63 information.

  • GFK-2222AW - PACS CPU Ref Manual.pdf

    Posted: 2/28/2023

    GFK-2222AW: - Updated Section 3.2.1to include new RMS to User Flash Settings parameter. - Updated Section 4.5.4 to include CPE330 for RMS to User Flash. Changed Section 4.6.1 to Section 4.7. - Updated Section 4.8 with SVC_REQ 63 information.

  • GFK-2222AV - PACS CPU Ref Manual.pdf

    Posted: 12/6/2022

    GFK-2222UV: Updates to support CPE200 Series controllers. Updates to support CPE310-Bxxx controller. Updates to support OPC UA 2D Array Access. Updates to support firmware release 10.70

  • GFK-2222AU - PACSystems CPU Ref Man.pdf

    Posted: 8/9/2022

    GFK-2222AU: - Updates to sections 4.10.1 and 4.10.3 to address the new Legacy Client/Server Protocol Memory Access feature and other Password and Privilege Level enhancements. - Updates to support the release of CPE302/305-Bxxx. Added note about RMS to flash performance in section 3.2.13. - Addition of RSTi-EP EPXCPE2XX controllers. Updates to Access Control List. Updates to Flash Memory and Override Tables. - Correction to the maximum number of supported simplex & redundant PROFINET devices.